Catalog Number - Black & Decker LHT2436 Mode D'emploi

40V MAX* LITHIUM
TRIMMER / EDGER
INSTRUCTION MANUAL

CATALOG NUMBER

LST136
For use only with LB series 36v or 40v Max* batteries.
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.
If you have a question or experience a problem with your BlAck+DeckeR purchase, go to http://www.blackanddecker.com/instantanswers . If
you can't find the answer or do not have access to the Internet, call 1-800-544-6986 from 8 a.m. to 5 p.m. eST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE
ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 40 volts. Measured under a workload, nominal voltage is 36.
To register your new product, visit www.BlackandDecker.com/NewOwner
KEY INFORMATION YOU SHOULD KNOW:
• The guard must be installed before trimming or
edging - if not, the motor will overheat.
• When replacing the line, use only .065 inch diameter
ROUND line (B+D Model #AF-100 is recommended) -
otherwise the tool will not function properly.
• Do not bump the feed head against the ground - it
will disrupt the feed mechanism.
1