Normal Use; Contents - AEG 10616 Mode D'emploi

Normal use

The charger is intended for charging open and
a variety of closed, maintenance-free lead-acid
rechargeable batteries (batteries) as found in cars,
boats, lorries and other vehicles, e.g.:
•
wet batteries (WET) Lead-acid batteries (liquid
electrolyte)
•
Maintenance-free lead-acid batteries (MF)
•
Gel batteries (gel-type electrolyte)
•
EFB (enhanced flooded battery)
•
AGM batteries (electrolyte inside absorbed glass
matt)
•
Maintenance-free lead-acid batteries (MF)
The charger can be connected directly to the bat-
tery using the battery clamps.
This charger is not intended to charge battery types
other than those specified above.
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children should
be supervised to ensure they do not play with the
device.
This device is not intended for commercial use.
Any other use or modification of the device is con-
sidered improper and involves significant risks. The
manufacturer assumes no liability for damages due
to improper use.
Familiarise yourself with all device functions and
learn how to correctly use the device before first
using it. For this purpose please carefully read the
following operating instructions. Store this manual
in a safe location. When passing the device on to
other be sure to also include all documentation.

Contents

Check the package contents immediately after un-
packing. Check the device and all parts for damage.
Do not use a defective device or parts.
•
4 A or 6 A or 8 A Microprocessor Charger
•
Clamp terminal connection cable
•
operating instruction
Accessories available for convenient connection:
•
Ring terminal connection cable
•
Battery connection cable for on-board outlet
•
Extension / charging cable 2 m
Please include all relevant documentation to other
users!
English 19