Rim Location Direction - Bosch Start Line TCE 420 Notice Originale

en 38 | Start Line TCE 420 | Operation
4. Depress the blade control pedal 7-3 to make the
blade start working.
5. When the bead is broken, release the pedal at once.
6. Rotate the tire until the edge of the tire is detached
from the rim and repeat at the other side.
7. Apply lubricant to the tire.
!
Not using the grease will seriously damage the tire.
Please use the special grease.
|
1 695 108 074 2016-07-27
7.5

Rim location direction

How to decide from which side of the wheel to
demount tire?
1. When fix the wheel, the side of standard rim will
upward as figure.
2. Measure three dimension of A, B and C.
3. When fix the rim, the smallest size of C must be
positioned at the top position.
Robert Bosch GmbH