Worx LANDROID Guide D'installation page 10

Your Landroid needs to know where to mow. This is why you have to mark its working area with a boundary wire
®
that will form an invisible fence. This wire will also guide your Landroid
If your neighbor also uses a Landroid
boundary wire and your neighbor's.
1. Placing the Charging Base
First of all, find a spot for the charging base, taking into account the position of your outdoor electrical outlet since the charging base
only has a 10m power cord.
NOTE: Make sure the adaptor and the electrical outlet are always kept in a dry place.
10
EN
, then you must keep a space of at least 0.5 metres between your
®
1.1
Landroid
or fence, with the charging components facing into your lawn.
Allow a straight boundary wire, at least 2m long with no obstacles
to the left and right of the charging base. If possible, place the
charging base in the shade, and batteries are better recharged in a
cool place.
The charging base must be positioned on relatively level ground.
It must not be positioned on an inclined surface or a place that
makes its plate bend.
1.2
There are grooves on the charging base. Slide the boundary wire
in, and the grooves guides the boundary wire to the wire terminal.
90
o
to its charging base.
®
's charging base is allowed to be placed against the wall
®