Technical Data; Accessories; Overall Dimensions - SFA SANICOMPACT COMFORT+ Mode D'emploi

EN

4. TECHNICAL DATA

MAXIMUM VERTICAL DISCHARGE
MAXIMUM HORIZONTAL DISCHARGE
NOMINAL POWER
PROTECTION INDEX
NET WEIGHT

5. ACCESSORIES

(see fig.4)

6. OVERALL DIMENSIONS

(see fig.1)
7. INSTALLATION
7.1 Preparation of the support frame
A
• Insert the threaded rods
dimensions : L = 45 mm +
• Place the lock nut on the back of the frame and tighten the assembly. Select the height of your
toilet bowl according to these values:
- Bottom insert = seat height 415mm.
- Middle insert = seat height 445mm.
- Top insert = seat height 475mm.
• Screw the stainless steel inserts
• Insert the retaining brackets
18
B
A into the mounting holes of the frame according to the following
X X
( being the thickness of your cladding, plasterboard, tiles, box ...).
B onto the threaded rods.
into the mounting holes in the frame.
C
3 m
30 m
550 W
IPX4
43 kg
C