Symbols Description - PANCONTROL PAN Minimeter Mode D'emploi

- Never use the device with the rear cover removed or with the battery and
fuse compartment open!
- Do not use the device near strong magnetic fields (for e.g. welding
transformer), as this can distort the display.
- Do not use the device outdoors, in humid surroundings or in environments
that are subjected to extreme temperature fluctuations.
- Do not store the device in places which are exposed to direct sunlight.
- Remove the battery if the device is not used for a long time.
- If changes or modifications are made to the device, the operational safety is
no longer guaranteed and the warranty becomes void.
- Before each measurement, check the function on a reliably functioning
voltage source.

4. Symbols Description

Conforms to the relevant European Union directive (EN-61010)
Product is protected by double insulation
Risk of Danger. Important information See instruction manual
Hazardous voltage!
This product should not be disposed along with normal
domestic waste at the end of its service life but should be
handed over at a collection point for recycling electrical and
electronic devices.
The device is designed for making measurements in building
installations. Examples are measurements on junction boards,
CAT III circuit breakers, wiring, switches, permanently installed
sockets, devices for industrial use as well as permanently
installed motors.
MAX 600 V
DC voltage / current (DC)
max. voltage to earth (AC / DC)
20
English