Connecting; Connect To Ac Power; Dock The Headset; Connect To Pc - Logitech Jabra BH970 Guide De L'utilisateur

2. Connecting

Launch the Interactive Setup Wizard Available from www.logitech.com/support/BH970
The easiest way to connect and configure the BH970 Headset is to use the Interactive Setup Wizard available from www.logitech.com/
support/BH970. Refer to the Important Information Guide for important safety instructions prior to installing and using
the BH970 Headset.
2.1

Connect to AC Power

Connect the Power Adapter to the Base
1. Plug the power adapter into the port marked
2. Connect the power adapter to an AC outlet.
2.2

Dock the Headset

Dock the headset, as illustrated. When the headset is docked correctly the headset battery will begin charging, if needed.
Keep the headset docked while connecting the BH970 Headset, or when not in use.
2.3

Connect to PC

Connect a PC to the Base
You can connect the BH970 Headset solution to both a PC and a desk telephone.
1. Plug the supplied USB cable into the port marked
2. Connect the USB cable to any free USB port on the PC.
BH970 Wireless Mono DECT Headset User's Guide
for Animated Setup Instructions
on the base.
on the base.
10