Installation; Required Tools - American Standard INAX SpaLet Manuel D'installation Et De L'utilisateur

Installation

1. Required tools

Have the following tools for installing this product:
adjustable end wrench, Phillips head screwdriver,
flat-blade screwdriver.
2. Install the junction fitting
1) Close the toilet water shutoff valve fully.
2) Flush the toilet and empty all the water from the
tank.
3) Place a wash bowl or other container
underneath the tank water supply hose. Then
loosen the box nut on the tank inlet side and
remove it.
CAUTION
• B e careful not to damage the water supply hose.
4) Place the packing in the junction fitting box nut
and connect the tank inlet to the junction fitting.
CAUTION
• D o not overtighten the nut.
5) Insert the packing in the tank water supply hose
box nut and connect the tank water supply hose
to the junction fitting.
CAUTION
• D o not overtighten the nut.
Tank Water
Supply Hose
Installation
Figure
Packing
Junction
Fitting
Tank Water
Supply Hose
Water Shutoff
Valve
11
Bowl Cock Side
Box Nut
Water Shutoff Valve
Close
Tank Inlet
Box Nut
Packing