Measure The Size Of The Toilet; Conditions For Using Water Supply Hose - American Standard INAX SpaLet Manuel D'installation Et De L'utilisateur

1. Measure the size of the toilet.

Depending on the size of the toilet, it may not be
possible to mount this product on it.
Make sure the toilet's dimensions are as shown in
the figure on the right.
2. Conditions for using water supply
hose (included)
The length of the water supply hose included with this
product is 37-3/8" (950 mm), but a length of 31-1/2"
(800 mm) from the junction fitting to the seat unit's
water supply socket is appropriate. (Refer to the figure
on the right)
Installation Figure
Seal washer
Water supply
valve
17-5/16"-19-5/8"
(440-500 mm)
Water supply hose
(w/ T junction)
Toilet Water
supply hose
8
5-1/8" to 8-1/2"
(130 to 215 mm)
1-1/8" (30 mm)
or more