Maintaining This Product; Cleaning The Seat Unit; Cleaning The Nozzles - American Standard INAX SpaLet Manuel D'installation Et De L'utilisateur

Maintaining This Product

Cleaning the Seat Unit

Periodically, wipe off the seat unit with
a soft cloth dampened with water.
Changing Nozzle Tips
a) Ensure bidet is powered ON.
b) For side panel type, under non-seated situation to clean
nozzles manually, press "Seat Temp" and "Water Temp"
buttons at the same time for over 2 seconds.
For remote type, under non-seated situation
to clean nozzles manually, press "Nozzle
Cleaning" button for over 2 seconds.
c) Grasp the nozzle tips and pull out.
d) Push new tips onto the nozzle ends.

Cleaning the Nozzles

a) Bidet Seat must be powered ON to clean
nozzle tip.
b) For side panel type, under non-seated
situation to clean nozzles manually, press
"Seat Temp" and "Water Temp" buttons at the
same time for over 2 seconds.
For remote type, under non-seated situation
to clean nozzles manually, press "Nozzle
Cleaning" button for over 2 seconds.
c) Grasp the nozzle tip and pull out. Use a soft
sponge to clean any accumulated debris.
28