Table des Matières
Publicité
10.
Install the Towel Bar
1/4" x 20 Screw
Vis 1/4" x 20
Tornillo de 1/4" x 20
Towel Bar
Porte-serviettes
Toallero de barra
Insert a small hex wrench into hole in screw
head and turn clockwise to secure towel bar.
Insérer une petite clé hexagonale dans
l'orifice de la tête de la vis et tourner vers la
droite pour sécuriser le porte-serviettes.
Introduzca una llave hexagonal pequeña en
el orificio de la cabeza del tornillo y gire hacia
la derecha para fijar el toallero.
Place a clear washer then a clear sleeve onto each 1/4 x 20 screw.
From the inside side of the outside panel, insert a screw into each mounting hole
in the panel.
Slide a washer over the screw on the outside of the panel.
Position the towel bar over the screw and finger tighten the screw.
Insert the second screw into the door panel, slide a washer over the screw, align
the second end of the towel bar, and finger tighten the screw.
Insert a small hex wrench into the side hole in each screw head. Turn each screw
clockwise to tighten. Do not overtighten or the glass may be damaged.
Repeat the procedures for the inside panel towel bar.
Sterling
Washer
Rondelle
Arandela
Washer
Sleeve
Rondelle
Manchon
Arandela
Manga
21
1063216-2-E
Publicité
Table des Matières
