Gigaset 5010 Manuel D'utilisation page 8

Appendix
Care
To clean, wipe with a moist or
antistatic cloth only, never
with a dry cloth (risk of elec-
trostatic charging and
discharge) or strong cleaning
agent.
If your telephone is not
working perfectly
Lift handset, no dialling
tone: Is the connecting line
correctly plugged into the tel-
ephone and the telephone
socket?
Dialling tone audible but tel-
ephone will not dial : The
connection is OK. Is the dial-
ling mode set correctly? See
"Changing the dialling mode".
PABX only: No connection or
incorrect connection when
dialling from memory (e.g.
last number redial, speed
dial): Program external line
prefix.
Recall key does not work: Set
appropriate flash time.
Insert strips
Blank insert strips for the rep-
ertory keys can be found on
the Internet at
www.gigaset.com/corded-
phones.
Contacts
If you should encounter any
problems when operating the
telephone connected to a
communication system with
analogue network access,
please contact the network
operator responsible or your
dealer.
7
EN
Authorisation
This device is intended for
connection to analogue net-
works outside the EEA (with
the exception of Switzerland)
depending on national type
approval.
Country-specific requirements
have been taken into consid-
eration.
We, Gigaset Communications
GmbH, declare that this device
meets the essential require-
ments and other relevant reg-
ulations laid down in Directive
1999/5/CE.
A copy of the 1999/5/EC Dec-
laration of Conformity is avail-
able at this Internet address:
www.gigaset.com/docs