Gigaset 5010 Manuel D'utilisation page 4

Saving numbers
Various settings on the tele-
phone have to be completed
?
with the Set
To cancel the save or setting
operation (e.g. after an incor-
rect entry) without saving,
replace the handset instead of
?
pressing
setting is then retained.
◆
When saving numbers,
pauses can be inserted by
;
pressing
1st digit!).
◆
When saving numbers, the
last number dialled can be
inserted at the 1st digit by
;
pressing
digits).
◆
Saving deletes the previ-
ous content of the mem-
ory
Saving repertory numbers
You can save a total of up to
20 numbers (max. 32 digits)
on the two levels of repertory
keys.
c?
Lift handset, press
Set key. (For 2nd
memory level,
also press
:
Press the reper-
tory key under
which you want to
save the repertory
number.
o
Enter the number
to be saved.
?a
Press Set key and
replace handset.
Recommended: Key combina-
tions for special functions on
private PABX's and public tele-
phone systems can also be
saved to the repertory keys.
key.
. The original
(not at the
(max. 32
=
.)
3
EN
Saving with notebook
function
During a call, you can save
("note") the number dialled or
a number that you are told to
one of the repertory keys. It is
recommended that a specific
repertory key is set aside for
this function and labelled as
"Note".
either ...
◆
Saving the number
dialled:
?:
;
or ...
◆
Saving another number
(e.g. a number you have
been told):
o
?
Activating/deactivating
baby call (direct call)
If a number is set for the baby
call function, it is automati-
cally dialled when you press
any key (except for
J
).
It is only possible to dial any
other number once the baby
call number has been deleted.
Incoming calls can be
answered when baby call is
activated.
c?K
o
?a
Deactivating
c?K
?a
Press the Set key,
press repertory
key for the
number to be
noted.
Press the last
number redial key.
Enter the number
(that you have
been told).
Press Set key.
?
and
Lift handset,
select function.
Enter direct call
number (max. 32
digits).
Press Set key and
replace handset.
Lift handset,
select function.
Press Set key and
replace handset.