Gigaset 5010 Manuel D'utilisation page 6

Activating/deactivating
the waiting melody
c?110
Lift handset,
select function.
0 1
/ 0: Deactivate,
1: Activate.
?a
Press Set key and
replace handset.
Blocking/releasing
number groups
You can block up to 3 number
groups. This means that num-
bers beginning with the
blocked digits cannot then be
dialled.
c?86
Lift handset,
select function.
1 3
... Enter 1st, 2nd or
3rd blocking posi-
tion.
o
Enter beginning of
number to be
blocked (max. 3
digits).
?a
Press Set key and
replace handset.
Releasing
c?86
Lift handset,
select function.
1 3
... Enter position to
be released.
?a
Press Set key and
replace handset.
Locking/unlocking the
telephone
When the telephone is locked,
except for a saved emergency
number (see "Saving/deleting
an emergency number") no
numbers can be dialled;
incoming calls can be
answered.
c?8
Lift handset,
select function.
1 0
/ 1: Lock, 0: Unlock.
?a
Press Set key and
replace handset.
5
EN
Temporarily suspending the
lock for 1 call
c?82?
o
a
After replacing the handset
the lock is active again.
Operation on a PABX
Deleting/entering the
external line prefix
When operating the tele-
phone on a private PABX, you
may need to save a one or
two-digit external line prefix.
A maximum of 3 external line
prefixes are possible. When
saving the external line prefix,
a dialling pause is
automatically set.
c?0;
◆
Deleting all external line
prefixes:
?a
◆
Entering an external line
prefix:
o
◆
To enter an additional
external line prefix:
; o
?a
Lift handset,
select function.
Dial number.
Replace handset
after the call.
Lift handset,
select function,
press last number
redial key.
Press Set key and
replace handset.
Enter one or max.
three-digit exter-
nal line prefix.
Press last number
redial key, enter
next prefix.
Press Set key and
replace handset.