System Configuration - Sony RM-IP10 Mode D'emploi

System Configuration

• You can connect up to 112 cameras and five IP remote controllers.
• The joystick of the IP remote controller allows comfortable pan/tilt and zoom operations.
System configuration
Camera
BRC-H900, BRC-Z700,
BRC-Z330
IP control card
BRBK-IP10, BRBK-IP7Z
Camera
BRC-H900, BRC-Z700,
BRC-Z330
IP control card
BRBK-IP10, BRBK-IP7Z
Camera
BRC-H900, BRC-Z700,
BRC-Z330
IP control card
BRBK-IP10, BRBK-IP7Z
PC for the setting
Video signal
Remote control (LAN) signal
Tally/contact signal
,
* Connect the tally connector (outputs the camera number that is on-air) of the video switcher to the TALLY/
CONTACT connector of RM-IP10. If there are multiple RM-IP10s, connect the same signal to all the TALLY/
CONTACT connectors. In this case, set the TALLY/CONTACT switch (DIP 1 switch 4 and 5) to the ON AIR TALLY
6
GB
System Configuration
Switching hub
Signal flow
HD video monitor
Video switcher
*
IP remote controller RM-IP10*
IP remote controller RM-IP10*