Sony RM-IP10 Mode D'emploi page 5

C SDI 1, 2 connectors (BNC type)
Supplies down-converted SD-SDI signals that
conform to the SMPTE259M serial digital interface
standards, or HD-SDI signals that conform to the
SMPTE292 serial digital interface standards. Select
HD-SDI or SD-SDI signals with the 4 HD/SD
select switch.
D HD/SD select switch
The SD setting supplies SD-SDI signals and the
HD setting supplies HD-SDI signals.
Notes
• SD-SDI and HD-SDI signals cannot be supplied
simultaneously.
• Set the SD/HD select switch before turning on the
camera.
• Do not push the switch forcibly with a
screwdriver, etc.
Location and Function of Parts
5
GB