Adjusting Brightness - Sony RM-IP10 Mode D'emploi

To adjust the white balance manually
1
Set WHITE BALANCE to MANUAL in the
COLOR menu of the camera.
For setting, see "COLOR Menu" on the operating
instructions of the camera.
2
Press the MODE button so that the R and B
indicators on the VALUE/R and BRIGHT/B
controls light (white balance adjustment mode).
3
Adjust the red gain with the R control and the blue
gain with the B control.
VALUE
Turn toward – to
weaken red.
–
R
BRIGHT
Turn toward – to
weaken blue.
–
B
Functions of the R and B controls
When the white balance adjustment mode is selected
with the MODE button on the Remote Control Unit, the
functions of the R control and B control change
according to the WHITE BALANCE setting in the
COLOR menu of the camera.
WHITE R control
BALANCE
setting
MANUAL Red gain control
AUTO, OFFSET control
ONE PUSH

Adjusting brightness

1
Set MODE to SHUTTER Pri, IRIS Pri, GAIN Pri
or MANUAL in the EXPOSURE menu of the
camera.
For setting, see "EXPOSURE Menu" on the
operating instructions of the camera.
2
Press the MODE button so that the VALUE and
BRIGHT indicators on the VALUE/R and
BRIGHT/B controls light (Brightness adjustment
mode).
Turn toward + to
emphasize red.
+
MODE
Turn toward + to
emphasize blue.
+
B control
Blue gain control
OFFSET control
3
Adjust the brightness with the VALUE or BRIGHT
control.
Turn toward – to
VALUE
darken the picture by
changing shutter
speed, gain level or
F-number.
–
R
BRIGHT
Turn toward – to
darken the picture by
changing exposure
compensation level,
–
F-number or gain
B
level.
Functions of the VALUE and BRIGHT controls
The functions of the VALUE control and the BRIGHT
control change according to the MODE setting in the
EXPOSURE menu, as follows:
MODE Function of
setting VALUE control
FULL AUTO Not used
SHUTTER Shutter speed
Pri control
IRIS Pri F-number control
GAIN Pri Gain control
MANUAL
Shutter speed
control
Turn toward + to
brighten the picture by
changing shutter
speed, gain level or F-
number.
+
MODE
Turn toward + to
brighten the picture by
changing exposure
compensation level, F-
+
number or gain level.
Function of BRIGHT
control
AE LEVEL
AE LEVEL
AE LEVEL
AE LEVEL
• F-number and gain
controls (when the
DIP 2 switch 3 at the
bottom of the IP
remote controller is
set to ON)
• F-number control
(when the DIP 2
switch 3 at the bottom
of the IP remote
controller is set to
OFF)
13
Adjusting the Camera
GB