Attach Side Studs (Legs); Attach The Assembled Frame To The Appliance - Napoleon HD81-1 Instructions D'installation Et D'opération

26

5.3.2 ATTACH SIDE STUDS (LEGS)

A. Attach the outside steel studs (2) to the top of
EN
the top steel stud (6).
B. Fasten the outside steel studs (2) and inside
steel studs (3) to the bottom steel studs (4).
C. Attach the stud shield (1) to the top steel
stud (6).
NOTE: Tabs on stud shield must be bent
forward to maintain clearances to

5.3.3 ATTACH THE ASSEMBLED FRAME TO THE APPLIANCE

A. Align the frame assembly to the framing
brackets and secure with screws
provided. The frame assembly
should be fl ush with the front
of the stud shield.
B. Secure the frame assembly
to the stud shield.
C. Secure the frame assembly
to the framed combustible
enclosure by bending out the
nailing tabs and securing.
W415-2201 / A / 12.14.16
STUD SHIELD
TABS
combustibles.
.
2
Top Steel
Stud
Frame Assembly
Nailing Tabs
6
3
4
1
2
3
4
Stud
Shield
Framing
Brackets