Cafe DISTINCT BY DESIGN CHS900M Manuel De L'utilisateur page 11

Precision Cooking (Cont.)
Hestan Cue Cookware or Precision Probe (Cont.)
®
4. When prompted, touch the On/Off button of the
desired burner.
SELECT BURNER
Press On/O button on desired burner or press Sync
Burners button to join the two left burners.
5. If you choose the rear burners or front right, the range
will search for your paired smart accessory.
6. On some models, if you choose the front left burner,
the LCD will prompt for you to choose which type
of cookware you wish to use. To use Hestan Cue
cookware or Precision Probe, choose BLUETOOTH
COOKWARE/PROBE.
SELECT COOKWARE TYPE
The selected burner may be used with conventional
cookware or with Precision Cooking compatible
Bluetooth cookware.
CONVENTIONAL BLUETOOTH COOKWARE/PROBE
7. When your paired cookware or probe is detected, you
will be prompted to activate it. This turns it on so it is
ready for cooking.
10:35 AM
ACTIVATE COOKWARE
Activate Precision Cooking compatible cookware or
Precision Cooking probe. Cookware should be large
enough to span both burners.
CANCEL
8. If no paired accessories are found, Precision Cooking
will cancel. Refer to Settings – Bluetooth to pair
Hestan Cue cookware or Precision probe.
®
NO COOKWARE PAIRED
This burner works only with compatible Bluetooth
cookware or probe.
CANCEL
49-2000387 Rev. 4
10:35 AM
CANCEL
10:35 AM
10:35 AM
9. Activate your Hestan Cue
Probe. Refer to the table for instructions for each
device.
Supported
Devices How to Activate
Hestan
Cue Firmly double tap the
®
cookware black plastic endcap
Precision
Probe Press side button once
If it is not activated within 2 minutes, the Precision
Cook mode will timeout.
Unable to detect active Bluetooth cookware or
®
10. When this screen shows, your Hestan Cue
cookware or Precision probe is ready to select the
cooking temperature. As you adjust the temperature
level at the burner control or in the SmartHQ app,
the desired temperature will appear on the display.
See section Surface Units – Operating the Cooktop
Elements.
COOKTOP
OFF
READY
TO OVEN
When the burner is On, the LCD display shows an
orange outline.
When the display shows "PREHEATING" the
cookware temperature is increasing. When it reaches
the desired set temperature, the word "PREHEATING"
will disappear.
COOKTOP
OFF
175
°F
PREHEATING
TO OVEN
cookware or Precision
®
Control with this App
Hestan Cue®
(by Hestan Smart Cooking)
Café Kitchen
(by Café)
10:35 AM
NO COOKWARE ACTIVATED
Precision Cooking probe.
OK
10:35 AM
Warming
Zone
OFF OFF
Use burner controls or
mobile app to to set the
Precision Cooking
temperature.
OFF
10:35 AM
Warming
Zone
OFF OFF
Use burner controls to
update Precision Cooking
temperature
OFF
®
11