Table des Matières
Publicité
OBJ_BUCH-2473-003.book Page 12 Wednesday, November 11, 2015 2:33 PM
12 | English
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Inserting SDS-plus Drilling Tools
Removing SDS-plus Drilling Tools
Inserting the Key Type Drill Chuck
+
(PBH Universal
)
Inserting the Keyless Chuck
+
(PBH Universal
)
*Not available in all countries.
Selecting the operating mode and
rotation direction
Changing the chisel position
(Vario-Lock)
Changing the position of the
auxiliary handle
Adjusting the drilling depth X
1 609 92A 1KS | (11.11.15)
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Figure Please observe
1
2
3
*
4
5
6
7
8
X
Page
169
169
170
170
171–172
172
172
173
Bosch Power Tools
Publicité
Table des Matières
