5.2 PARAMETER SETTING
To turn the machine
When the display shows F.01, release the keys.
The key
parameter. To quit programming, turn the machine off and on again.
Note. It is recommend to use the default parameters set by the
manufacturer (see Par. 5.5).
5.3 PARAMETERS
PARAMETER
F.01
F.02
on, press
scrolls the parameters while the key
DISPLAY
°F
°C
2
3
4
5
6
7
and hold the keys simultaneously.
DESCRIPTION
Unit for measuring degrees in Fahrenheit
Unit for measuring degrees in Celsius
Enabling coffee dispensing (channel 1)
Enabling water and steam dispensing
(channel 2)
Not used
Enabling coffee + water and steam
dispensing (channel 1 and 2)
Not used
Enabling coffee + water and steam
dispensing (channel 1 and 2)
with prevalence for coffee dispensing.
When the coffee channel is in the ON
position, it disables the water and steam
channel. When the
coffee channel is in the OFF position, it
confirms the selected
9