Carburetor; Additional Technical Data - Hilti DSH 600-X Mode D'emploi

4 Technical data
4.1 Gasoline-powered cut-off saw
Engine displacement
Weight with diamond wheel flange, without cut-off wheel,
tank empty
Rated power at 8500 rpm in accordance with ISO 7293
Maximum spindle speed
Max. rotational speed of the cut-off wheel
Maximum cutting depth

Carburetor

4.2

Additional technical data

Engine type
Maximum engine speed
Idle speed
Ignition (type)
Electrode gap
Spark plug
Tightening torque for fitting the spark plug
Fuel mixture
Tank capacity
Tank capacity
cut-off wheel arbor size / diameter of centering bush
cut-off wheel arbor size / diameter of centering bush
Minimum flange outside diameter for diamond cut-off
wheels (only for steel-core wheels; the flanges are marked
with "FOR DIAMOND ABRASIVE STEEL CORE WHEELS
ONLY")
Minimum flange outside diameter for abrasive cut-off
wheels (composite wheels)
Maximum cut-off wheel outside diameter
Maximum nominal cut-off wheel thickness (only for steel-core
wheels)
Maximum nominal cut-off wheel thickness (composite
wheels)
Tightening torque for fitting the cut-off wheel
*2136487*
2136487
DSH 600-X
3.86 in³
(63.3 cm³)
21.72 lb
(9.85 kg)
4.3 hp
(3.2 kW)
5,500 /min
5,500 /min
4.7 in
(120 mm)
Walbro; model: WT-1203
DSH 600-X
Single-cylinder, air-cooled two-
stroke engine
9350 ± 200 /min
2900 ± 200 /min
Electronic
0.03 in
(0.7 mm)
NGK, type: CMR7A
9 ftlb
f
(12 Nm)
API-TC oil 2% (1:50)
870 cm³
29.4 oz
0.8 in
(20 mm)
1.00 in
(25.4 mm)
2.4 in
(60 mm)
3.1 in
(78 mm)
11.8 in
(300 mm)
0.18 in
(4.5 mm)
0.16 in
(4.0 mm)
18 ftlb
f
(25 Nm)
English 9