auna MC-30 DAB Mode D'emploi page 42

EN
42
Tune to an FM station preset
1. Press and release the Preset button on the Micro System or the Prog.
button on the remote control. 'Preset Recall' is displayed together with
the preset list.
2. Use the rotary control on the Micro System or the Previous/Next
buttons on the remote control to move to the Preset location and
station that you would like to listen to (1- 30).
3. Press the rotary control on the Micro System to Select or the Select
button on the remote control. The Micro System will tune to that station
and begin to play.
Note: If no FM station has been stored under the preset button, 'Preset
Empty' will be displayed, then the Micro System will revert to the
previously selected radio station after a few seconds.
FM display information
When listening to an FM station you can change the information that will
appear on the second line of the display. There are several different types of
information that are sent by the broadcaster.
Radiotext (RT)
This is scrolling text information supplied by the broadcaster. Information
could be the name of an artist or music title, DJ's name, contact details for
the radio station etc.
Program Type (PTY)
Such as 'Rock', 'Pop', Talk' or 'News'
Station name or frequency
Such as BBC R4 or 92-95MHz
Audio mode
The radio will automatically switch between Stereo and Mono, depending
on the quality of the signal being received but you can override this function
and manually switch between 'Stereo' and 'Mono'.
Day and date
Supplied by the broadcaster.
Note: Repeatedly press and release the Menu button on the Micro
System to cycle through the different information options.