Yamaha DPX-1300 Mode D'emploi page 41

Menu operations 1 (with no submenu)
Menu operations use the procedure below to adjust menu item without submenus.
Select a menu group (Image / Signal / Initial / Setup)
(Select with the +/- buttons)
Menu items related to the selected menu group are displayed.
Select an item to adjust or a setting
(Select with the h / g buttons)
You can now adjust the selected item.
Choose a setting for the selected item
(Usually, use the +/- buttons)
MENU Button
AUTO
V. POS ZOOM FOCUS
IRIS SETTING PATT
ESCAPE
ESCAPE MENU
PATTERN
ASPECT
LAMP COVER
ASPECT INPUT
Remote Control Main Unit
or
Remote Control Main Unit
1. Press the MENU button to open
the menu screen.
STANDBY/ON
MENU
Memo
SETTING
• If you have opened the menu screen
INPUT
TEMP FAN
previously, the menu displays the
settings from the last time you used it.
2. Press the + or - button to select a
menu group.
The illustration at right depicts the [Setup]
group being selected.
Menu operations
Move Menu Window
Image Signal Initial
Black Level 0
White Level 0
Gamma Trim a b c
Hue 0
Saturation 100
Sharpness Gain
2
Sharpness Type 2
Color Adjustment WRGB
White Peaking 0
Iris
Level Adjustment
Memory 1
Move Menu Window
Image Signal Initial
Location Front / Table
V Keystone Correction 0
H Keystone Correction 0
Remote Control Sensor Front & Rear
ID 1
Remote Control ID
Lens Adjustment Lock Off
Lamp Power 82
Menu Color Monotone
Message Off
Trigger Out Lamp
Baud Rate 115200bps
Memory 1
Setup
d e
6500K + 0.000uv
-
9
VIDEO
Setup
On
On
VIDEO
39