Level Adjustment - Yamaha DPX-1300 Mode D'emploi

Menu items
Color Adjustment
(continued)
(Input signal)
Video/S-Video/Component/
RGB TV/RGB PC/D4 VIDEO
White Peaking
Iris
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC

Level Adjustment

(Input signal)
Component/RGB TV/RGB PC
32
- WRGB
Adjusts the color temperature, the color
coordinates and gain for the three primary
colors, R(Red), G(Green), and B(Blue).
The unit sets the complemental colors
Y(Yellow), C(Cyan), and M(Magenta)
automatically. Adjusting [Color Temp.]
resets the RGB gain based on color
coordinate settings. Adjusting [Gain] resets
[Color temp.] based on color coordinate
settings. Use the color temperature fixed
mode if you want to adjust the RGB
coordinates while keeping the color
temperature setting unchanged. Refer to
" Example: Using the color temperature
fixed mode" on page 43 for operation
methods.
- WRGBYCM
Adjusts the color coordinates and gain
for each component color individually.
When you have selected WRGBYCM
in the color adjustment submenu, press
RESET to automatically adjust the
RGB gain and YCM color balance to
the most appropriate setting, based on
color temp and RGB color balance
settings.
Choices: White correction : -0.02 to +0.02
Color temperature : 5,000 to 10,000
Gain : 0.00 to 1.99
Enhances the brilliance of the white portions of the projected image.
Choices: 0 to 5
Adjusts the iris (Optical).
You can select 3 levels.
Close
Adjusts the analog input signal gain and offset settings.
Adjust the gain and offset for component and RGB (Y, C
Choices: -50 to 0 to +50 (except for HDMI signals)
y
0.5
0.0
0.0 0.5 x
y
0.5
0.0
0.0 0.5 x
Open
, C /R, G, B) input signals.
B R
G (Green)
W (Color temperature
and h UV)
R (Red)
B (Blue)
G (Green)
Y (Yelow)
C (Cyan)
W (Color temperature
and h UV)
R (Red)
M (Magenta)
B (Blue)