Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Memory
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/service/test-report/
DDR3
240-pin, 1.5V
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system
performance. The following illustrations explain the population rules for Dual-Channel
mode.
1
2
Important
•
DDR3 memory modules are not interchangeable with DDR2 and the DDR3 standard
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
•
In Dual-Channel mode, make sure that you install memory modules of the same type
and density in different channel DIMM slots.
To enable successful system boot-up, always insert the memory modules into the
•
DIMM1 first.
Due to the chipset resource deployment, the system density will only be detected up
•
to 31+GB (not full 32GB) when each DIMM is installed with a 8GB memory module.
72x2=144 pin
48x2=96 pin
DIMM1
DIMM3
DIMM2
DIMM4
DIMM1
DIMM3
DIMM2
DIMM4
Installed
Empty
En-9
Publicité
Table des Matières
