General Cleaning; Removing Obstructions And Blockages; Clean The Air Filter - Grizzly BLSB 3030 Traduction De La Notice D'utilisation Originale

GB

General cleaning

Clean the device in each case
immediately after working, since
otherwise mud with leaf residues
hardens and sets and can pos-
sibly no longer be removed without
dismantling the motor casing.
Such cleaning work is not cov-
ered by the guarantee.
Do not employ any cleaning agents
or solvents. They can irreparably
damage the device. Chemical sub-
stances can attack the plastic parts
of the device.
• Clean the device casing, the tube and
the ventilation slots regularly with a
soft brush or a cloth. Never clean the
device under running water.
• Take off the collection bag after finish-
ing work, turn it inside out and brush it
thoroughly. In this way, you avoid the
generation of mold and unpleasant
odours.
• Free the outlet area from possible
shredded residues.
Removing obstructions and
blockages
Leaves and fresh plant cuttings may ob-
struct the device
Cleaning the impeller:
1. Loosen the fixing bolt (6) of the
intake cover (7) and open the
intake cover.
2. Carefully remove debris or ob-
structions from the impeller (9).
3. Check that the impeller rotates
easily and is in perfect condi-
tion. Replace a defective impel-
100
ler at our service centre.
4. Refasten the intake cover.
Cleaning the discharge chute:
1. Remove the collection bag
(30) or the blower pipe (25).
2. Clean the outer area of the de-
vice discharge chute (10).
3. Remove dirt remnants on the
inside of the discharge chute
with a brush (e.g. bottle brush).
Remove bulky items with a blunt
and dull tool.
Cleaning the suction pipe
1. Loosen the fixing screws (33) and re-
move the suction pipe (23).
2. Tap the suction pipe and clean out the
inside if necessary.

Clean the Air Filter

Never operate the equipment with-
out an air filter, otherwise dust and
dirt will get into the motor and result
in damage to the machine. Keep the
air filter clean.
1. Switch off the equipment.
2. Press the locking devices (36)
at the air filter cover (20) and re-
move the air filter cover.
3. Remove the air filter (37) from
the air filter cover (20).
4. Clean the air filter (13) with soap
and water.
Never use petrol!
5. Allow the filter to dry in the air.
6. Reinsert the filter in reverse order.
Clean the air filter regularly (see
"Service intervals"). Replace the air
filter if it is worn, damaged or dirty.
Replace the air filter if it is worn,
damaged or heavily soiled.