Safety Features; Initial Start-Up; Installing/Removing Blower Pipe And Blower Attachment - Grizzly BLSB 3030 Traduction De La Notice D'utilisation Originale

13 mounting collar
14 exhaust guard
15 suction pipe handle
16 fuel tank
17 tank cover
18 fuel pump (primer)
19 choke
20 air filter cover
21 starter handle with starter cable
22 plastic hook
23a upper suction pipe
23b lower suction pipe
24 wheels
25 blower pipe
26 standard blower attachment
27 flat blower attachment
28 neck strap
29 intake pipe for collection bag
30 zippered collection bag
31 fuel mixing canister
32 service key
33 bolt and nut for suction pipe at-
tachment
34 spring hinge
35 2 fixing screws
36 locking devices at the air filter
cover
37 air filter
38 spark plug

Safety features

2 On/off switch
The engine is shut off with the
on/off switch. It will have to be
on setting „I" to restart the en-
gine.
7 Intake cover
protects the operator from unin-
tentional contact with the cutting
tools and from injury by ejected
foreign objects..
14 Exhaust guard
prevents hands or flammable
materials from coming into con-
tact with the hot exhaust.

Initial start-up

Before operating the equipment, you must
- install the blower or suction pipes,
- install the collection bag for suctioning
leaves,
- install the neck strap,
- fill with the fuel mixture
Caution, Risk of Injury! During
the assembly or disassembly of
the blower pipe, suction pipe or
collection bag, the engine must
be turned off, the on/off switch
set on „0", and all moving parts
must have come to a standstill.
Installing/removing blower
pipe and blower attachment
1. Screw on the desired blower at-
tachment (26/27) clockwise onto
the blower pipe (25), until the
two parts snap firmly into place.
2. Loosen the fixing bolt (12) at the
mounting collar (13) of the en-
gine housing (5).
3. Slide the blower pipe (25) into
the discharge chute (10). The lug
on the blower pipe fits into the
recess on the engine housing
(position).
3. Turn the blower pipe (25) clock-
wise until the two marks show in
a stacked (position).
4. Retighten the fixing bolt (12).
6. Remove the blower pipe and
blower attachment in reverse
order.
GB
95