Slim Hp, Slim Hp Mic, And Slim Hp Aquamic - Advanced Bionics Naida CI M90 Manuel D'utilisation

Please refer to the M Battery and M Battery Charger Instructions for Use
for additional information.

Slim HP, Slim HP Mic, and Slim HP AquaMic

Assembly Instructions
1. To operate your headpiece with your cochlear implant system you will
need to install a Slim HP Magnet and attach a Slim HP Color Cap, as
follows:
2. Insert the Slim HP Magnet into the magnet well of the headpiece.
3. For recipients using the Standard Magnet, no specific magnet
orientation is required.
4. For recipients using the 3D Magnet, the magnet should be inserted
so that the arrow on the magnet points up when the headpiece is on
the head.
5. Attach a color cap (See "Color Caps" section).
6. Attach the headpiece and cable to your sound processor (See
"Cables" section).
7. Then place the bottom side of the headpiece over the internal mag-
net of your cochlear implant.
NOTE: For recipients of HiRes Ultra 3D implants, if the headpiece
repels or pushes away when brought over the internal device, rotate
the headpiece back and forth as you move the headpiece closer
towards the implant. Once attraction is felt, adjust the headpiece to
the original orientation and place on head.
29