How To Use Your Naída Ci M90 Sound Processor - Advanced Bionics Naida CI M90 Manuel D'utilisation

•
M Wearing Clip, M Snuggie™ accessory, M Retention Cuff
•
M Listening Check™ accessory
The Naída CI M90 is compatible with the following accessory products:
•
AB Remote mobile application
•
Phonak Roger transmitters
•
Phonak RemoteControl
•
Phonak TV Connector
•
Phonak PartnerMic™ microphone
•
Phonak Naída™ Link M hearing instrument
The Naída CI M90 sound processor is Bluetooth 4.2 certified. Any
mobile device that supports Bluetooth, Hands Free Profile (HFP) and/or
Advanced Audio Distribution Profile (A2DP) should work with your Naída
CI M90 sound processor. Bluetooth compatibility information should
be used as a reference guide only, because hardware and software
levels and releases may vary, and numerous hardware and software
combinations are possible. Advanced Bionics assumes no responsibility
for the compatibility; thus, it is the user's responsibility to do product
compatibility testing by himself before making purchasing decisions on
smartphones and other Bluetooth-enabled devices.
How to Use your Naída CI M90 Sound Processor
Powering Naída CI M90
The sound processor is turned on when a charged battery is attached
to the sound processor. When the battery is first attached, the orange
LED located in the middle of the multifunction button will indicate battery
charge.
The startup program is selected by the cochlear implant professional
during programming.
To power down the Naída CI M90 sound processor, simply remove the
battery.
Attaching the Battery
Hold the Naída CI M90 in one hand. Rotate the headpiece cable upward
in order to avoid bumping it upon battery placement.
11