Attaching The Belt Clip - Siemens Gigaset C590 Manuel De L'utilisateur

Attaching the belt clip

The handset has notches on each side to attach the belt clip.
¤
To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤
To remove – using your right
thumb apply pressure to the cen-
tre of the belt clip, push the fin-
gernail of your left index finger
between the clip and the casing
and lift the clip upwards.
Placing the handset in the base/charging cradle
¤
Place the handset in the base/charging cradle with its display facing forward.
Each handset is registered with the base at the factory. You do not need to com-
plete a registration. To use your handset with a different base or to use additional
handsets with your base register the handset manually (
To charge the batteries, leave the handset in the base/charging cradle.
Please note
Only place the handset in the base/charger included with the handset.
First steps
¢
page 42).
13