Setting The Date And Time - Siemens Gigaset C590 Manuel De L'utilisateur

Setting the date and time

Set the date and time so that the correct date and time can be assigned to incoming
calls, and so that the alarm can be used.
Date:
01/31/2009
Time:
00:00am
Back
¤
Enter the hours and minutes in 4 digit
format via the keypad,
e.g. QM 5 for 07:15 am.
Change the input position with
the control key if necessary.
¤
If necessary, press the AM/PM display
key to change the time setting from
AM to PM.
INT Time
Date/Time
Save
¤
Press the key below
display to open the input field.
If you have already set the time and
date, open the input field via the menu
¢
( page 26).
The Date/Time submenu displays.
¤
The active input position flashes.
Enter the month, day and year as an
8-digit number via the keypad,
e.g. Q 4
2QQO for 10/14/2009.
Press the right or left control key
to change the input position and
correct an entry.
¤
Press down on the control key to switch
to the time input field.
First steps
§Time§
on the
Date/Time
Date:
10/14/2009
Time:
00:00am
AM/PM Save
15