Changing The Dust Bag - Bosch BSG81466 Mode D'emploi

Changing the dust bag

14
Replacing the dust bag
If the dust bag change indicator lights up brightly
and uniformly when the nozzle is lifted from the
floor and the vacuum is on its highest setting, you
should change the dust bag, even if it is not yet
full. In this case it is essential to change the dust
bag due to the type of material it contains.
Turn the dust compartment locking lever in the
direction of the arrow to open the dust
compartment cover.
Seal the dust bag by pulling the sealing strip
and then remove it.
Insert the new dust bag into the holder as far as
the stop. As you do this, leave it folded up, as it
is when removed from its packaging.
Unfold the dust bag in the dust bag
compartment as far as possible.
When closing the dust bag compartment lid,
make sure that the dust bag is not trapped.
Caution: the dust bag compartment lid will
only close when the dust bag or textile dust
bag is inserted.
If the dust bag change indicator is still lit after
the dust bag has been changed, please check
whether the nozzle, tube or flexible hose are
blocked.
en