Bosch BSG81466 Mode D'emploi page 16

Changing the dust bag en
Replacing the HEPA filter
The HEPA filter should be replaced once a year.
Press the locking tab in the direction of the arrow
to unlatch the exhaust grille and open it.
Release the Hepa filter by moving the locking lever
in the direction of the arrow and remove it from
the vacuum cleaner.
Insert the new Hepa filter and clip into place.
Close the exhaust grille.
If you have used the vacuum cleaner to vacuum
up fine dust particles, clean the motor protection
filter by tapping out the dirt and, if necessary,
replace the HEPA filter.
16