6/ Using Zodiac Tri With Tri Pro Module; 7/ Water Balance - Zodiac TRiPRO Notice De Montage

9. Press the (SELECT) button to activate the peristaltic pump ('ACID ENABLED' will be displayed).
10. When appropriate option has been selected, press (MENU) button 2 times or wait 30 seconds for
the TRi power pack to return to the default display on the LCD screen.
NOTE : Use the opposite procedure in order to deactivate the peristaltic pump (default display on the
LCD screen will return to 'pH ---').

6/ Using Zodiac TRI with TRi PRO module

The Zodiac TRi is now ready to automatically regulate the pH and the ACL levels in the pool water using
the TRi PRO module.
4. Set the 'ON' and 'OFF' times (refer to the Zodiac TRi Salt chlorinator user manual).
5. If the pool water pH exceeds the set point, the symbol '^' will be displayed to the right of the pH set
point value on the LCD screen. pH minus will then be released automatically according to the predefined
cycles.
If the pool water ACL is unsuitable to keep a good disinfectant effect (ORP too low), the symbol '^' will
be displayed to the right of the ACL set point value on the LCD screen. Chlorine generation will
automatically start according to the predefined cycles.
6. Refer to the instructions concerning water balance hereunder in order to ensure optimal operating
conditions for the Zodiac TRi.
 Zodiac TRi Salt chlorinator together with the TRi PRO module will now automatically maintain the
appropriate pH and ACL levels for the pool water.
NOTE : The TRi PRO module is designed to use only pH minus (therefore to lower the pH). Do
NOT use other type of chemicals.

7/ Water balance

The Zodiac TRI with the TRi PRO module is designed to disinfect the swimming pool water via its
controlled salt electrolysis function and to maintain the pH level.
The following information concerning the values to be respected for a correct water balance is essential
in order to fully enjoy your pool.
Ensuring that the pool water balance is correct from the start will reduce the probability of encountering
problems during the first days of operation or during the season of use of your pool.
REMARK : Even if TRi PRO module is an automatic regulation for ACL and pH, it is mandatory to
make some manual water analysis regularly to check water balance parameters.
38