Tecsis P3297 Mode D'emploi page 33

6. Commissioning, operation
Mechanical connection
max.
50 Nm
„
„
„
„
tecsis Operating Instructions - Pressure sensor P3297
For model P3297 with parallel thread, the sealing ring is included in the
delivery.
During mounting, make sure that the sealing faces at the pressure sensor
and the measuring point are clean and undamaged.
Only ever screw in, or unscrew, the instrument via the spanner-lats and
to the prescribed torque using an appropriate tool. The correct torque
depends on the dimensions of the process connection and the gasket used
(form/material). When screwing in or unscrewing the pressure sensor, do
not use the housing for purchase.
When screwing in, do not cross the threads.
GB
33