Tippmann X7 Phenom Manuel D'utilisation page 7

Masquer les pouces Voir aussi pour X7 Phenom:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Keep the barrel blocking device installed on marker when not shooting (page 4).
Never point the marker at anything you do not intend to shoot.
Never fire your marker at anything you do not intend to shoot because there may be
balls or foreign debris lodged in the chamber, barrel, and/or the marker valve.
Do not shoot at fragile objects such as windows.
Never fire your marker at personal property of others. The paintball impact can
cause damage and the paint can stain the finish of automobiles, houses, etc.
Always keep the muzzle pointed down or in a safe direction, even if you stumble or
fall.
Eye, face, and ear protection designed specifically to stop paintballs in the form of
goggles and full face mask meeting ASTM Specification F 1776 must be worn by the
user and any person within range.
Never shoot at a person who is not protected by eye, face, and ear protection
designed for paintball.
Pressurize and load the marker only when the marker will be immediately used.
Store the marker unloaded and degassed in a secure place.
NOTE: Before storing or disassembling, be sure to remove paintballs and air/CO2
supply (see
Unloading Your Marker
on pages 10 and 14) and install the barrel blocking device (see page 4).
Do not field strip or otherwise disassemble this marker while it is pressurized with
air/CO2 supply.
Dress appropriately when playing the game of paintball. Avoid exposing any skin
when playing the game of paintball. Even a light layer will absorb some of the
impact and protect you from the paintballs.
Keep exposed skin away from escaping gas when installing or removing air/CO2
cylinder or if the marker or air/CO2 supply is leaking. Compressed air, CO2, and
nitrogen gasses are very cold and can cause frostbite under certain conditions.
Only use .68 caliber paintballs. Never load or fire any foreign objects.
Avoid alcoholic beverages before and during the use of this marker. Handling
markers while under the influence of drugs or alcohol is a criminal disregard for
public safety.
Avoid shooting an opponent at point blank, 6 feet or less.
Familiarize yourself with instructions listed on air supply cylinder or adapter. Contact
the air supply cylinder or adapter manufacturer with any questions.
Read the
Air/CO2 Cylinder Warnings
beginning the cylinder installation or removal.
Always measure your marker's velocity before playing paintball and never shoot at
velocities in excess of 300 feet per second (see instructions on page 9).
and
Air/CO2 Cylinder Removal
and
on pages 12–13 before
Safety Tips
7
E
N
G
L
I
S
H
instructions

Publicité

Table des Matières
loading

Produits Connexes pour Tippmann X7 Phenom

Ce manuel est également adapté pour:

X7 phenom mechanical

Table des Matières