Zibro D112 Manuel D'utilisation page 56

The device starts to dehumidify when the relative humidity in the room is higher than the
set value.
The device switches off automatically when the set value is reached, and restarts when the
humidity in the room rises again.
Setting the hydrostat to the 'MAX.' position keeps the device in continuous operation.
4 Turn the adjustment button to the 'OFF' position to turn the device off.
AIR FILTER
The D112 and D114 dehumidifiers are equipped with a 3-layer filter package to clean the
circulated room air. The filters are delivered with a separately packed 3M™ Filtrete™ filter
and an active carbon filter. These filters must be placed according to instructions before
operating the dehumidifiers.
1 Screen filter; to remove bigger dust particles.
2 3M™ Filtrete™ filter; to remove unhealthy particles from the air such as pollen,
bacteria, animal dander and dust.
3 Active carbon filter sheet; to remove odours.
The filter holder on the backside of the unit can be opened. Active carbon filter and 3M™
Filtrete™ filter can be removed. Screen filter is part of the filter holder.
1 The screen filter has to be cleaned regularly with a vacuum cleaner to avoid blocking
of the air flow.
2 The positive/negative electro statically charged 3M™ Filtrete™ filter is recommended
to be changed every 3 months. Unusual dirt, construction work, pets, the presence of
smokers and running the dehumidifier unit continuously can shorten the life time of
the 3M™ Filtrete™ filter.
New filter
3 The active carbon sheet can be cleaned with a vacuum cleaner when dusty but has to
be changed at the same time as the 3M™ Filtrete™ filter.
NOTE!
• Never use the dehumidifier without the screen filter!
• To run the unit without active carbon sheet and/or 3M™ Filtrete™ filter
package does not bring any harm to the dehumidifier. In that case unhealthy
dust is not removed.
• Replacement filters are available at your dealer.
4
56
Recommended change of filter