Standard Accessories; Applications - HIKOKI CJ 36DA Mode D'emploi

English
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CJ36DA / CJ36DB : Cordless Jig saw
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/
EU on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Direct current
V Rated voltage
n
No-load speed
0
Weight
(According to EPTA-Procedure 01/2014)
kg
Switching ON
Switching OFF
Lock
Switch locks to the "ON" position
Disconnect the battery
Lock
Unlock
Wood
Metal
Stainless steel
Lighting mode switch
Warning
Prohibited action
Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 288.
Standard accessories are subject to change without notice.

APPLICATIONS

○ Cutting various lumber and pocket cutting
○ Cutting mild steel plate, aluminum plate, and copper
plate
○ Cutting synthetic resins, such as phenol resin and vinyl
chloride
○ Cutting thin and soft construction materials
○ Cutting stainless steel plate (with No. 97 blade)
SPECIFICATIONS
1. Power tool
Model
Voltage
Max. cutting depth
No-Load Speed
Stroke
Min. cutting radius
Battery available for
this tool*
Weight**
* Existing batteries
series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
14
CJ36DA CJ36DB
36 V
Wood 160 mm
Mild steel 10 mm
Stainless steel 3.2 mm
800 – 3500 min
–1
26 mm
25 mm
Multi volt battery
2.7 kg 2.7 kg
(BSL36A18) (BSL36A18)
3.0 kg 2.9 kg
(BSL36B18) (BSL36B18)
(BSL3660/3620/3626, BSL18xx