Technical Specifications; Mechanical And Electrical Safety Devices - Omcan MS-IT-0220-C Manuel D'instructions

Safety and Warranty
instructions found on that manual.
• Lift the machine still wrapped in a transparent polyethylene sheet and extract it from the box.
• Now check the box content and make sure it corresponds to what shown on the external label.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule a drop off to either
an Omcan authorized service depot in the area, or to an Omcan Service warehouse to repair the
equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see www.omcan.com/warranty.html for complete info.
WARNING:
The packaging components (cardboard, polyethylene, and others) are classified as normal solid urban waste
and can therefore be disposed of without difficulty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

Technical Specifications

The machine is essentially made of a base supporting a circular blade mounted in a tilted position. This blade
is driven by an electrical motor to slice foodstuffs. The machine is equipped with a carriage holding a product
tray and sliding on a bar mounted under the base top, parallel to the blade. Slice thickness is adjusted by
means of a gauge plate mounted in front of the blade. This plate, against which rests the product to be sliced
is moved transversely with respect to the blade by a value corresponding to the desired slice thickness. The
product is fed to the machine (towards the gauge plate) by gravity. All the machine components are made of
polished and anodically oxidized aluminium alloy, of stainless steel and food grade plastic material. The blade
is driven by an electrical motor, transmission is by means of a longitudinally grooved belt. The machine is
started and stopped by a control button or switch provided with auxiliary circuit preventing accidental restarts
after an outage. Some of the machine models have a user-friendly and safe built-in blade sharpener.

MECHANICAL AND ELECTRICAL SAFETY DEVICES

The following mechanical safety devices were installed:
• A series of aluminium and transparent plastic guards on the product carriage.
6