LENCO DIR-141 Mode D'emploi page 25

FM (RADIO)
Select "FM mode" from the main menu by using the navigation wheel(6) or with the navigation
buttons on the remote. Press the navigation wheel(6) to enter the FM radio mode. The FM freqency
start on 87.5MHz.
To save all stations with strong signal, press the navigation wheel(6), it will show "auto scan?" Choose
"YES". Then it will start auto scan. Once the auto-scan is complete, stations will be saved in your
favorites.
You will then be able to browse through these saved stations by holding down the "<" or ">" buttons
to skip between saved stations.
To manually scroll through FM frequency, simply press the "<" or ">" buttons to go backwards or
forwards through the frequency wave.
Pre-setting your favourite FM stations
To save presets manually, select and listen to the station frequency number for the station you wish
to save.
Follow by holding down the "FAV" button for 1-2 secs and the number "01" will display on the screen.
Use the navigation knob to browse through preset numbers(up to 99) and select the chosen preset
number you wish to save it as by pressing the navigation wheel(6).
Recalling preset FM stations
View your favourite FM stations when you are on FM mode by simply selecting the "FAV" button and
begin scrolling through saved stations.
25