LENCO DIR-141 Mode D'emploi page 24

pairing mode of your phone/tablet and search for Lenco DIR-141 pairing name on your
phone/tablet.
When connected successfully, it will make a connected sound. Then, you can play music via
Bluetooth and adjust volume on the DIR-141 device or your phone/tablet.
TX
With Bluetooth TX mode it's possible to stream the sound of the DIR-141 to another Bluetooth
device like a Bluetooth speakerset or headphone.
Select TX mode in the Configuration (Bluetooth), then search for the pairing name of your desired
Bluetooth device, then press the Navigation wheel(6) to confirm.
When pairing was successful, you can listen the music through the connected device.
Note:
The volume of the connected device must be turnedup. Then you can alter the volume on the
DIR-141.
TX Speaker on/off
when using an external Bluetooth speakerset you can hear a delay in sound output between the
internal and connected BT speakers, when the speakerset is in the same room as the DIR-141.
To disable the internal speakers you can use this option and select "off".
24