Napoleon GSS48 Mode D'emploi page 11

GSS48ST (SEE THROUGH)
Minimum Enclosure Clearances
WARNING!
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance. Do
not use wood or drywall.
WARNING!
and connected to the gas supply in order to safely turn off the burner.
36"
(914mm)
minimum
to ceiling.
60 3/4"
(1543mm)
minimum
to ceiling.
24 3/4" (629mm)
Including 1/8"
(3mm) clearance
per side.
6"
(152mm)
6"
(152mm)
minimum to
floor
NOTE!
Ensure top of cabinet is closed to
prevent rain and debris from falling on top of
the appliance.
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
You must have clear and easy access to the on/off valve AFTER the appliance is installed
NON COMBUSTIBLE
6"
(152mm)
50 3/4" (1289mm)
(Including 1/8" (3mm)
clearance per side)
36"
(914mm)
minimum
to ceiling.
6"
(152mm)
minimum to
floor
All material in shaded
Combustible. (including
framing, sheeting and
Certified to ASTM E-136
Nailing Tabs (4 per side)
6"
(152mm)
Gas and electrical lines protude from the
bottom of the appliance located on the
right side.
21" (533mm) to
outside of steel
studs.
All material in shaded area must
be Non Combustible. (including
framing, sheeting and finishing
materials). Certified to ASTM E-136
Trim depth can be
altered depending on
finishing material.
11
EN
area must be Non
finishing materials).
www.napoleongrills.com