Wall Mounting - Panasonic KX-UT670 Guide Rapide

Installation
Do not make power connections that exceed the ratings for the AC outlet
or power equipment. If the power rating of a surge protector, etc. is
exceeded, it can cause a fire due to heat buildup.
Do not bundle up the AC adaptor cord. The cord may become damaged,
which can lead to a fire, electric shock, or electric short.
The unit should only be connected to a power supply of the type as shown
on the label on the unit.
Completely insert the AC adaptor into the AC outlet. Failure to do so may
cause electric shock and/or excessive heat resulting in a fire.
Placement
Care should be taken so that objects do not fall onto, and liquids are not
spilled into, the unit. Do not subject this unit to excessive smoke, dust,
moisture, mechanical vibration, shock, or direct sunlight.
Do not place heavy objects on top of this unit.
Place this unit on a flat surface.
Allow 10 cm (3

Wall Mounting

Make sure that the wall that the unit will be attached to is strong enough
to support the unit (approx. 1.3 kg [2.9 lb]). If not, it is necessary for the
wall to be reinforced.
Only use the optional wall mount kit with the unit. The wall mount kit
includes the necessary screws, washers, and wall mounting adaptor.
When driving the screws into the wall, be careful to avoid touching any
metal laths, wire laths or metal plates in the wall.
/ in) clearance around the unit for proper ventilation.
15
16
For Your Safety
5