Useful Information About The Baby Monitor; Changing The Batteries; Care And Storage - Beurer BY 84 Mode D'emploi

to high sensitivity, the baby unit transmits all
noises.
Volume (Parent unit)
Push the volume control ('Volume') up or down
in order to increase or reduce the receiver vol-
ume on the parent unit.
Note
There is no noise transmission if you turn the
volume control all the way down.
8. Useful information about the
baby monitor
• Position the receiver and transmitter upright
in order to ensure optimal transmission qual-
ity.
• Battery operation of the baby monitor mini-
mises electrosmog from electrical and mag-
netic alternating fields.
• You can increase the range of the baby moni-
tor by positioning the baby unit as high up as
possible near a door or window and ensuring
that the batteries are not too weak.
• Other radio waves can interfere with the trans-
mission of the baby monitor. Therefore, do not
position the baby monitor near devices such
as microwaves, WLAN etc. The following other
factors can interfere with the baby monitor's
transmission or shorten its range: Furniture,
walls, houses, trees, environmental factors
(such as fog, rain).

9. Changing the batteries

The devices have a battery level indicator in
the display. If the batteries are too weak, the
devices switch off automatically and you should
change the batteries.
Note
When changing the batteries, use batteries
of the same type, make and capacity. Always
change all batteries at the same time. Use bat-
teries free from heavy metals.

10. Care and storage

The service life of the device depends on its
careful handling:
CAUTION
• Remove the batteries if the device is not in
use for an extended period.
• Protect the devices from knocks, damp, dust,
chemicals, drastic changes in temperature,
electromagnetic fields and nearby sources of
heat (ovens, heaters).
21