Beurer BY 84 Mode D'emploi page 16

• Never place the baby monitor in the cot on
within the child's reach.
• Make sure that cables are not accessible to
your child.
• Place the baby monitor 2 m away from your
baby, in order to minimise the possibility of
electrosmog pollution and noise pollution.
• Before using the baby monitor, always ensure
that it is functioning correctly and that it has
sufficiently charged batteries if using battery
operation.
• Danger of explosion if using the wrong bat-
teries!
• Never touch the plug contacts with sharp or
metallic objects.
• Never submerge the device in water. Never
rinse it in running water.
• Never use the device in proximity to moisture.
• Do not cover the baby monitor with a towel
or cover.
• Only use the power supply units included
with the delivery.
• The plug-in power unit must be operated only
from a power supply as specified on it.
• Do not pull, screw up or bend the mains
cable.
• The device must be placed near an easily
accessible socket.
• Disconnect the adapter plug from the mains
when the device is not in use.
• The device and the adapter plug should not
come into contact with hot surfaces or sharp-
edged objects.
• Do not use any attachments that are not rec-
ommended or offered as accessories by the
manufacturer.
General notes
• Repairs may only be performed by Customer
Service or authorized dealers. Before making
a claim, please check the batteries first and
replace them if necessary.
• Under no circumstances should you open or
repair the device yourself, as faultless func-
tionality could no longer be guaranteed there-
after. Failure to comply will result in voiding of
the warranty.
• Should you still have questions on using our
appliances, please contact our customer
service.
16