Helite E-TURTLE Manuel D'utilisation page 31

Masquer les pouces Voir aussi pour E-TURTLE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
F - OPERATION OF LEDS
Please note: a loss of GPS signal can affect the speed of LED flashing (faster
LED flashing).
If you notice any other malfunctions, please contact your dealer or our after sales
service via e-mail sav@helite.com or by phone +33 3 80 35 48 26.
User Guide
System operational
Green flashing LED / no beep
Battery low
Orange flashing LED / no beep
Battery almost empty
Orange flashing LED / 4 beeps
Battery charging
Orange LED / no beep
Charging completed
Green LED / no beep
when the charger is still connected
Pairing in process
Blue LED / 1 beep every 5 sec.
(during 30 sec.)
Pairing succeeded
Blue LED / 1 beep every 2 sec.
(2 short beeps when the sensor is already
recognized)
Pairing failed
Red LED / 4 beeps
(or too many sensors recognized
by the vest)
Disconnected e-cartridge, empty
e-cartridge or damaged cable.
Red LED / 1 beep every second
(while the e-cartridge is not connected or
replaced)
31
You can ride.
You need to
recharge the vest.
You can still
ride for 2 hours.
30 minutes of
battery life
remaining.
Wait until the
charging is
completed.
Unplug the
charger.
You have 30 se-
conds to pair the
fork sensor.
The vest and the
fork sensor are
paired.
Restart the
pairing.
Connect or
replace the
e-cartridge.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

E-gp air

Table des Matières