Helite E-TURTLE Manuel D'utilisation page 22

22
B. INSTALLING THE FORK SENSOR ON THE MOTORCYCLE
CAUTION Switch off all your vests before installing the fork sensor.
Fork
35 mm
≥ 37 mm
≥ 40 mm
≥ 44 mm
≥ 48 mm
≥ 50 mm
≥ 53 mm
1. Choose the right bracelet size.
Try the different sizes referring to the table
above. The right size has to be adjusted to
the motorcycle fork. The screw needs to be
screwed into the nut of the bracelet.
2. Assemble the sensor and the bracelet.
Clip the wide side of the bracelet to the side of the fork sensor.
Choose notch A to adjust the
bracelet to the size of your motorcycle fork.
3. Place the sensor.
CAUTION Make sure to thoroughly clean your fork
before installing the sensor.
a) Place the sensor on the bottom of one of the fork sleeves
of the motorcycle. Please check that no part of the motorcycle
comes into contact with the sensor while riding.
User Guide
Shim Foam
   
   
   
   
   
   
   
Notch Bracelet
A 1
A 1
A 2
A 2
A 2
A 2
A 3
Screw size
35 mm
35 mm
35 mm
35 mm
35 mm
50 mm
50 mm