Oven Setting Controls; Kitchen Timer; Cook Timer - Thermador PRO GRAND PRD364JDGC Manuel D'utilisation

Pan Placement
• Allow at least 1" (25.4 mm) of space between the pans
and the oven walls so heat can circulate around each
pan.
• Stagger bakeware so that one is not directly above
another. Allow 1½'' (38 mm) above and below each
pan.

Oven Setting Controls

1 1 2 2
1. ENTER verifies a selection
- +
2. ( ) decreases and (
temperatures, it is also used to scroll through menu
items.
3. CANCEL clears all oven operations.

Kitchen Timer

The Kitchen Timer can be set for up to 12 hours. It can be
used despite whether the range is in operation and
independently of all other functions.

Cook Timer

The Cook Timer is intended to mechanically shut the oven
off when the desired cooking time is complete. The Cook
Timer function is available for all of the primary cooking
modes except for Self-Clean mode.
Using the Oven
Figure 21: Pan Placement
2 2 3 3
) increases time and/or
Figure 22: Oven Setting Controls
To set the timer:
1. Press ENTER.
2. Use the "+" and "-" buttons to select either KITCHEN
TIMER or COOK TIMER.
3. Press ENTER.
4. Press the "+" and "-" buttons to select desired time.
5. A beep sounds when the timer ends. Press CANCEL
to terminate the beep and timer.
NOTE:
• COOK TIMER cannot be used if a temperature probe
is in use.
• The maximum timer setting is 12 hours.
Setting Bake, Convection
Bake, and Roast
Mode Selector Ring Mode Selector Ring Mode Selector Ring
Temperature Temperature Temperature
Selector Knob Selector Knob Selector Knob
Secondary Oven Selector Secondary Oven Selector Secondary Oven Selector
(select models) (select models) (select models)
Figure 23: 48'' Model Control Panel (appearance may vary)
Set the Ovens
1. Place rack in desired rack position and shut the door.
2. Set the Mode Selector Ring to BAKE, CONVEC BAKE,
ROAST, or CONVEC ROAST.
3. Set the Temperature Selector Knob to desired
temperature setting.
-- Readout will display "Preheating [| ...]" with the
selected cooking mode (for example, "Bake") and
the desired temperature ("350°F"). Display will
beep to indicate oven has finished preheating.
-- The temperature gauge will start to move toward
the temperature setting. The temperature gauge
reflects the temperature setting.
• The needle of the temperature gauge will move
to the new selected temperature setting if the
temperature setting is increased or decreased.
• The gauge is for reference only.
Main Oven Main Oven Main Oven
Selector Selector Selector
English 27