Taking Care Of Your Tria Laser; Troubleshooting - Beurer tria LAS100 Instructions D'utilisation

TAKING CARE OF YOUR
TRIA LASER
The Tria Laser doesn't require special care, but we
do recommend that you keep it clean, especially
the treatment window and skin sensor.
CLEANING INSTRUCTIONS
•
Make sure that the Tria Laser is turned off
and unplug the battery charger from the Tria
Laser and the power outlet.
•
To clean the Tria Laser and battery charger,
moisten a soft cloth with water and mild soap,
and wipe the treatment window and the exterior
of the device. Be careful not to damage the
treatment window. Allow to dry completely
before charging or turning on your Tria Laser.
•
To clean the skin sensor located at the base
of the Tria Laser. wipe it gently with a dry, lint-
free cloth.

TROUBLESHOOTING

Please contact Customer Service for additional help.
YOUR QUESTION
My Tria Laser won't
turn on.
DO NOT get the Tria Laser or battery
charger damp or wet. If it gets wet, DO NOT use
the Tria Laser or the battery charger. Contact
Customer Service. Performing a treatment with
a wet Tria Laser (or component) can cause
electrocution or electric shock.
LONG-TERM STORAGE
If you do not plan on using your device for a long
period of time, we recommend that you recharge
the device every 3 months to maintain the life of
the battery.
RECYCLING/DISPOSAL
The Tria Laser contains lithium batteries that
cannot be replaced. To recycle or dispose, please
follow the regulations where you live or contact
Customer Service for information.
IT'S POSSIBLE THAT
Your Tria Laser is
not charged.
HOW TO TROUBLESHOOT
Charge your Tria Laser.
(see page 9)
Tria Beauty
GB
YOU
Whil
Lase
on th
up."
Even
Lase
still "
Whe
Lase
noth
Whe
Lase
noth
14 15